How to Disassemble a Beretta 92FS Slide – Step-by-Step Guide

This page may contain affiliate links. If you click and buy, I may earn a small commission at no extra cost to you. Your purchase using affiliate links helps support the creation of independent content.

Disassemble a Beretta 92FS slide without the guesswork. Whether you’re deep cleaning, inspecting parts, or prepping for upgrades—this teardown covers every part, tool, and step to get it done right. Works for the Beretta M9A1 and Beretta 96 too.

---

TL;DR

• Step-by-step guide to disassemble a Beretta 92FS slide

• Works with the M9A1 and Beretta 96—same internals

• Covers locking block, firing pin block, safety lever, extractor, and firing pin

• Video timestamps walk you through each step

• Only tools needed: 1/16” punch and a pick

• Ideal for cleaning, repairs, or troubleshooting

---

Need Help Troubleshooting Your Beretta 92?

Slide won’t cycle? Trigger acting weird? Safety out of alignment?

🛠️ Check the Beretta 92/96/M9 Troubleshooting Guide

Step-by-step fixes for common issues on the 92FS, M9A1, and Beretta 96—slide or frame.

---

Why disassemble a Beretta 92FS slide?

Slide teardown helps with deep cleaning, part replacement, or diagnosing function issues.

This is where to start if you’re replacing a safety lever, inspecting your firing pin, or tuning extractor performance.

---

What tools do you need to disassemble a Beretta 92FS slide?

✅ 1/16” punch

✅ Pick tool

Optional: bench block, magnetic parts tray

---

How do you remove the locking block?

Video Timestamp: 0:40

• Push out the locking block plunger

• Ease the locking block forward and remove it

• Watch for the spring and plunger—they’ll come out too

---

How do you remove the firing pin block?

Video Timestamp: 1:51

• Press the plunger with a punch

• Use a pick to slide the firing pin block out of the channel

• Remove the spring and plunger last

• Go slow—don’t let tension snap parts out

---

How do you remove the safety lever?

Video Timestamp: 3:09

• Rotate the lever into alignment with its cam

• Hold detent pressure with a pick

• Carefully pull both sides of the lever out

• Watch the detent pin—people snap it by forcing it

---

How do you remove the extractor and firing pin?

Video Timestamp: 6:42

• Tap out the extractor retaining pin

• Wiggle the extractor loose

• With extractor out, the firing pin drops rearward

• Note spring orientation on removal

---

What should you check during disassembly?

• Carbon or damage on extractor face

• Firing pin tip condition

• Safety lever detent wear

• Firing pin block and plunger smoothness

• Debris or wear around locking block lugs

---

How to prep for cleaning or reassembly

• Lay out parts in order of removal

• Keep small pins grouped

• Use solvent and brush to scrub fouling

• Snap photos for reference

• Lightly oil parts before reassembly

---

FAQ – Beretta 92FS Slide Disassembly

Does this work for the M9A1 and Beretta 96?

Yes. The slides and internals are identical.

What’s the most common mistake during disassembly?

Forcing the safety lever. Misaligning the detent pin leads to breakage.

Can I remove the extractor first?

No. The firing pin block must be removed before the extractor pin is accessible.

Do I need to fully disassemble the slide for cleaning?

Not always. This teardown is ideal for troubleshooting or upgrades.

What if parts feel stuck?

Add a small drop of oil to the pin or detent and try again—don’t force it.

What if I’ve never done this before?

Take your time. The timestamps and video guide make it simple to follow.

---

{ “@context”: “https://schema.org”, “@graph”: [ { “@type”: “HowTo”, “name”: “How to Disassemble a Beretta 92FS Slide – Step-by-Step Guide”, “mainEntityOfPage”: { “@type”: “WebPage”, “@id”: “https://trb.fyi/how-to-disassemble-a-beretta-92fs-slide-step-by-step-guide/” }, “description”: “Step-by-step breakdown showing how to disassemble a Beretta 92FS slide, including locking block, extractor, firing pin block, and safety lever.”, “image”: “https://trb.fyi/wp-content/uploads/2024/04/1712801103_maxresdefault.webp”, “author”: { “@type”: “Person”, “name”: “Jason Schaller”, “url”: “https://trb.fyi/about-the-rogue-banshee-and-how-to-contact-us/”, “sameAs”: [ “https://youtube.com/@theroguebanshee”, “https://www.instagram.com/theroguebansheemedia/”, “https://twitter.com/roguebanshee”, “https://www.linkedin.com/in/jasonschaller/”, “https://www.linkedin.com/company/the-rogue-banshee/” ], “knowsAbout”: [ “DIY Gunsmithing”, “Beretta 92FS platform”, “Handgun disassembly and reassembly”, “Firearm maintenance and repair” ] }, “publisher”: { “@type”: “Organization”, “name”: “The Rogue Banshee”, “logo”: { “@type”: “ImageObject”, “url”: “https://trb.fyi/wp-content/uploads/2024/04/cropped-Webpage-logo.png”, “width”: 600, “height”: 60 } }, “datePublished”: “2018-04-04T02:29:00-06:00”, “dateModified”: “2025-07-05T07:04:00-06:00”, “keywords”: [ “disassemble a Beretta 92FS slide”, “Beretta 92FS slide disassembly”, “M9A1 slide teardown”, “Beretta 96 disassembly”, “DIY Gunsmithing” ], “wordCount”: 492, “timeRequired”: “PT3M”, “learningResourceType”: “how-to”, “educationalUse”: “Instructional”, “educationalLevel”: “Beginner”, “conditionsOfAccess”: “Controlled environment for safety and clarity”, “isPartOf”: { “@type”: “CreativeWorkSeries”, “name”: “Disassembly & Reassembly”, “url”: “https://trb.fyi/category/watch-learn/disassembly-and-reassembly/” }, “identifier”: { “@type”: “PropertyValue”, “propertyID”: “slug”, “value”: “how-to-disassemble-a-beretta-92fs-slide-step-by-step-guide” }, “about”: [ { “@type”: “Thing”, “name”: “Beretta 92FS” }, { “@type”: “Thing”, “name”: “Beretta slide disassembly” }, { “@type”: “Thing”, “name”: “DIY Gunsmithing” } ], “mentions”: [ { “@type”: “CreativeWork”, “name”: “Beretta 92/96/M9 Troubleshooting Guide”, “url”: “https://trb.fyi/beretta-92-96-m9-troubleshooting-guide/” }, { “@type”: “Article”, “name”: “How to Reassemble a Beretta 92FS Slide – Step-by-Step Guide”, “url”: “https://trb.fyi/how-to-reassemble-a-beretta-92fs-slide-step-by-step/” }, { “@type”: “Article”, “name”: “How to Reassemble a Beretta 92FS Frame – Step-by-Step Guide”, “url”: “https://trb.fyi/how-to-reassemble-a-beretta-92fs-frame-step-by-step-guide/” }, { “@type”: “Article”, “name”: “How to Disassemble a Beretta 92FS Frame – Step-by-Step Guide”, “url”: “https://trb.fyi/how-to-disassemble-a-beretta-92fs-frame-step-by-step-guide/” }, { “@type”: “MediaObject”, “name”: “Transcript”, “contentUrl”: “https://trb.fyi/wp-content/uploads/transcripts/beretta-92-96-m9-slide-disassembly.vtt” } ], “step”: [ { “@type”: “HowToStep”, “position”: 1, “name”: “Remove the Locking Block”, “url”: “https://trb.fyi/how-to-disassemble-a-beretta-92fs-slide-step-by-step-guide/#how-do-you-remove-the-locking-block” }, { “@type”: “HowToStep”, “position”: 2, “name”: “Remove the Firing Pin Block”, “url”: “https://trb.fyi/how-to-disassemble-a-beretta-92fs-slide-step-by-step-guide/#how-do-you-remove-the-firing-pin-block” }, { “@type”: “HowToStep”, “position”: 3, “name”: “Remove the Safety Lever”, “url”: “https://trb.fyi/how-to-disassemble-a-beretta-92fs-slide-step-by-step-guide/#how-do-you-remove-the-safety-lever” }, { “@type”: “HowToStep”, “position”: 4, “name”: “Remove the Extractor and Firing Pin”, “url”: “https://trb.fyi/how-to-disassemble-a-beretta-92fs-slide-step-by-step-guide/#how-do-you-remove-the-extractor-and-firing-pin” } ] }, { “@type”: “VideoObject”, “@id”: “https://rumble.com/v6vq8h9-beretta-92-96-m9-slide-disassembly.html”, “name”: “Beretta 92/96/M9 Slide Disassembly – Step-by-Step Guide”, “description”: “Full breakdown of the Beretta 92FS, M9A1, and 96 slide. Covers locking block, firing pin block, extractor, and safety lever.”, “thumbnailUrl”: “https://trb.fyi/wp-content/uploads/2024/04/1712801103_maxresdefault.webp”, “uploadDate”: “2018-04-04T02:29:00-06:00”, “duration”: “PT9M26S”, “embedUrl”: “https://rumble.com/embed/v6vq8h9/?pub=6u13p”, “contentUrl”: “https://rumble.com/v6vq8h9-beretta-92-96-m9-slide-disassembly.html”, “caption”: “https://trb.fyi/wp-content/uploads/transcripts/beretta-92-96-m9-slide-disassembly.vtt”, “potentialAction”: { “@type”: “WatchAction”, “target”: “https://rumble.com/v6vq8h9-beretta-92-96-m9-slide-disassembly.html” } }, { “@type”: “FAQPage”, “mainEntity”: [ { “@type”: “Question”, “name”: “Does this work for the M9A1 and Beretta 96?”, “acceptedAnswer”: { “@type”: “Answer”, “text”: “Yes. The slides and internals are identical.” } }, { “@type”: “Question”, “name”: “What’s the most common mistake during disassembly?”, “acceptedAnswer”: { “@type”: “Answer”, “text”: “Forcing the safety lever. Misaligning the detent pin leads to breakage.” } }, { “@type”: “Question”, “name”: “Can I remove the extractor first?”, “acceptedAnswer”: { “@type”: “Answer”, “text”: “No. The firing pin block must be removed before the extractor pin is accessible.” } }, { “@type”: “Question”, “name”: “Do I need to fully disassemble the slide for cleaning?”, “acceptedAnswer”: { “@type”: “Answer”, “text”: “Not always. This teardown is ideal for troubleshooting or upgrades.” } }, { “@type”: “Question”, “name”: “What if I’ve never done this before?”, “acceptedAnswer”: { “@type”: “Answer”, “text”: “Take your time. The timestamps and video guide make it simple to follow.” } } ] }, { “@type”: “BreadcrumbList”, “itemListElement”: [ { “@type”: “ListItem”, “position”: 1, “name”: “Watch & Learn”, “item”: “https://trb.fyi/category/watch-learn/” }, { “@type”: “ListItem”, “position”: 2, “name”: “Disassembly & Reassembly”, “item”: “https://trb.fyi/category/watch-learn/disassembly-and-reassembly/” }, { “@type”: “ListItem”, “position”: 3, “name”: “How to Disassemble a Beretta 92FS Slide”, “item”: “https://trb.fyi/how-to-disassemble-a-beretta-92fs-slide-step-by-step-guide/” } ] } ] }

Join The Rogue Nation!

Stay in the Loop with Real-World Gun Maintenance

No spam. Just proven firearm maintenance tips, gear reviews, and DIY builds, straight from a former gunsmith and 2A educator.

You’ll get:

DIY gunsmithing insights backed by experience

Behind-the-scenes builds from The Rogue Banshee

First access to new disassembly & troubleshooting guides

Tools and fixes that actually work

Support & Resources:

Love what I do here? Here’s how to support the mission and gear up::

• Shop Tools & Parts: trb.fyi/az
• TRB Merch: trb.fyi/merch
• YouTube Members Perks: trb.fyi/ytmembers
• All Resources in One Place: link.trb.fyi

Credits and Socials:

Connect with Me:

Follow for tools, tips, and teardown walk-throughs:

• Instagram – Behind-the-scenes shop content
• Facebook – Community posts & guide drops
• Twitter – Quick rants, 2A news, and hot takes
• Website – Full archive of all TRB content

Credits:

Original Content by The Rogue Banshee / My Rogue Solutions LLC.
Credit: Jason Schaller
Email: jschaller@trb.fyi

About the Author: Jason Schaller is a former FFL holder and founder of Eagle Eye Shooters Supply in Helena, MT, where he provided professional gunsmithing services and guided customers on all aspects of firearms ownership. Today, he teaches DIY gunsmithing at The Rogue Banshee and serves as a Chief Instructor at Freedom Crew University. With over a decade of hands-on professional experience with firearms and nearly 30 years in IT, Jason also holds top cybersecurity certifications including CISSP, CISA, and CRISC. When he’s not geeking out, he’s helping others build self-reliance, critical thinking, and firearms proficiency through real-world content.

Disclaimers:

Content Use & Compliance

The videos, articles, and images shared by The Rogue Banshee feature gear, tools, and products for informational and entertainment purposes only. All activities follow local, state, and federal laws where they were conducted in. All activities are conducted safely under professional supervision in approved locations.

Affiliate Disclaimer

Some links are affiliate-based. No extra cost to you, but they help support the work we do her when you purchase though them. Best of all, you support the content you want to see, hear and read with nothing out of your pocket.

Firearm Safety Notice

I promote safe and responsible firearm ownership. All activities are conducted in a controlled, professional environment.