Master Your Firearms: The Ultimate Firearm Troubleshooting Library to Diagnose, Fix, and Prevent Malfunctions
This page may contain affiliate links. If you click and buy, I may earn a small commission—at no extra cost to you. I only recommend tools I trust and use myself.
Firearm Troubleshooting Library: Diagnose and Fix Issues with Pistols, Rifles & Shotguns
Gun won’t cycle, feed, reset, or run like it should?
This is your no-nonsense Firearm Troubleshooting Library—built to get your gear running again. No forums. No fluff. No guessing games.
Whether your Glock won’t go back into battery, your AR-15 is short-stroking, or your 1911’s throwing mystery failures, we walk you through the fix—step-by-step.
Inside, you’ll get:
Clear diagnostics for pistols, rifles, and shotguns
Fixes based on real-world testing (not internet hearsay)
Tool callouts so you’re never mid-repair without the right gear
Made for the DIYer, weekend warrior, or anyone who just wants their gun to run right—every time.
🔄 Last updated: April 2025
TL;DR: Firearm Troubleshooting Library
Your gun’s not running right. This is where you fix it.
Step-by-step guides for pistols, rifles, and shotguns
Common problems broken down with clear diagnostics
Real-world solutions from hands-on experience
Gear and tool recs so you’re not stuck mid-fix
Whether it’s a Glock hiccup or a 12-gauge acting up, this Firearm Troubleshooting Library helps you solve it fast—and fix it right.
You Don’t Need Wild Theories. You Need Real Fixes.
The Firearm Troubleshooting Library is built for shooters who want their guns to run right—without chasing internet myths or guesswork. Whether you’re diagnosing feeding issues on your Glock, tuning your AR gas system, or trying to figure out what’s wrong with your 1911, this is where you get real answers.
From handguns to rifles, shotguns to range emergencies—this library shows you what’s wrong and how to fix it.
No fluff. No BS. Just straight-up solutions that get you back on target.
Handgun Troubleshooting
Fix feeding failures, trigger issues, cycling problems, and more. Glock, 1911, and other pistol platforms covered in step-by-step guides.
Rifle Troubleshooting
Whether it’s an AR-15 short-stroking or your AK’s ejector is acting up—this section helps you figure it out fast and fix it right.
Shotgun Troubleshooting (Coming Soon)
Failure to eject? Misfeeds with your semi-auto or pump? This section walks through diagnosing and correcting the most common issues.
Troubleshooting Tools (Coming Soon)
The tools that make diagnosis easier—calipers, gauges, borescope setups, and more. Know what you need before you need it.
The TRB 10 Commandments of DIY Gunsmithing
1. Always clear your firearm first.
Drop the mag. Rack the slide. Check the chamber. Physically and visually confirm it’s empty—every single time.
2. Treat every firearm like it’s loaded.
Even if you just cleared it, act like it’s live. This habit saves lives and fingers.
3. Eliminate distractions.
Turn off the podcast. Put the phone away. This is focused work—treat it that way.
4. Know what you’re doing before you do it.
If you’re not sure, stop. Look it up, rewatch the guide, or ask someone who knows.
5. Keep ammo off the bench.
It’s best to store ammunition in another room, but at the very least—don’t keep it on your workspace.
6. Use proper tools—not improvised ones.
That multi-tool in your pocket isn’t made for this. The right tool makes the job safer and easier.
7. Wear eye protection.
Springs launch. Solvents splash. Don’t risk your eyesight over a five-minute job.
8. Take your time.
Rushing leads to mistakes. Slower is smoother. Smoother is safer.
9. Always function check after reassembly.
Never assume it works. Confirm it before heading to the range.
10. Don’t be afraid to ask for help.
Everyone starts somewhere. Real skill comes from learning and doing—safely.
Firearm Troubleshooting Library FAQs
Start with the symptom. Feeding issue? Trigger not resetting? Slide hanging up? This library is broken down by function and platform—so you can match the issue, isolate the cause, and get a real fix. No wild guesses or forum voodoo.
Not always. A good set of punches, a bore light, and a basic bench setup go a long way. Each guide shows the tools you’ll need—nothing more, nothing less.
Absolutely. These guides are built for everyone. They include practical advice so you can fix your firearm with confidence.
Yes. Many issues start with fouling or gunked-up parts. A clean gun is easier to inspect, and it rules out simple causes before you start digging deeper.
That’s where the diagnostics come in. We help you separate variables step-by-step—so you can isolate the cause, not just throw parts at the problem.
Both. We cover platform-specific guides for Glock, AR-15, AK, etc., but also include universal malfunction types (e.g., failure to feed, light primer strikes) and how to track them down on any firearm.
⚠️ Disclaimer
The content on this page is for informational and entertainment purposes only. All firearm activities are performed safely, in compliance with local, state, and federal laws, and under controlled conditions.
This page may include affiliate links. If you purchase through these links, The Rogue Banshee may earn a small commission—at no additional cost to you. These earnings help support the channel, website, and ongoing content creation.
All tools, products, and techniques featured are based on personal experience and are not endorsements of any specific brand unless explicitly stated.
The Rogue Banshee promotes safe and responsible firearm ownership and maintenance. Always follow the four rules of firearm safety. Content is created in accordance with platform community guidelines and YouTube’s firearms policy.