How to Reassemble a Beretta 92FS Slide Step by Step

Putting a Beretta 92FS, M9A1, or 96 slide back together doesn’t have to be frustrating. Whether you just deep cleaned it, replaced parts, or had it Cerakoted—this guide walks through each step with video timestamps, part order, and key install tips to get it done right. TL;DR Why Should You Reassemble the Beretta Slide? Rebuilding […]

Jason Schaller

April 4, 2018

0

Disassembling the Winchester 94: A Comprehensive Guide

Have you ever found yourself standing in front of your Winchester Model 94, itching to delve into its inner workings? Well, let me take you back to the first time I disassembled my own rifle—what started as a moment of frustration quickly turned into a thrilling exploration. Learning the intricate parts not only deepened my […]

Jason Schaller

December 27, 2019

0

THE RCBS COLLET BULLET PULLER // A must own if you have to fix your reloads?

Have you ever reloaded a bunch of ammo just to find out something was wrong with the load? I had a bad batch of bullets come in and had to pull 500 of them. Will, doing it the old way (inertia bullet puller) was going to take too long. In this video, I show you […]

The Rogue Banshee

December 6, 2020

0

0

CONCEALMENT EXPRESS OWB HOLSTER // A sturdy owb kydex holster worthy enough for my EDC?

Looking for a Kydex holster that doesn’t use a paddle or clip? The Concealment Express OWB holster with Belt Loops just might be for you. With a new EDC firearm, comes a new EDC holster. I have said before that I do not like Inside the waistband (IWB) holsters. But I also don’t particularly care […]

Jason Schaller

March 26, 2021

0

0

For The Love Of Guns //Episode 4// Jordan Vinroe from JSD Supply

I had a great conversation with Jordan Vinroe from JSD supply. Jordan created JSD Supply and helps people build their own guns. Unfortunately, if there was something that could technically go wrong during this podcast… it did. It started with Internet problems and escalated to a computer failure. I had to do the interview from […]

Jason Schaller

August 16, 2021

0

0

Got Dirty Gun? Aegis Gun Care Can Fix That // Episode 12 of For The Love Of Guns

Sooner or later you are going to be a dirty gun owner. In this episode of For The Love Of Guns, I talk to Rod Gates from Aegis Gun Care. He has the solution for Dirty Gun Syndrome and your Dirty Gun. #aegis #gun #dirtygunowner #justasgood @TheRogueBanshee *** You can support our work by *** […]

Jason Schaller

December 20, 2021

0

0

The Rogue Banshee 3D Printer Live Stream

I am just testing a new plugin for my OctoPrint to see if I can stream live to Youtube. This is a print of a gunsmith vise block for a pistol. You can find it at https://www.thingiverse.com/thing:4977817 This is over a 10-hour print, and I may not be here for the chat. *** You can […]

The Rogue Banshee

April 14, 2022

0

0

D&H Tactical magazine for the Sig P320 // Finally aftermarket Magazines for the P320!

D&H Tactical is getting ready to release a 30-round mag for the Sig P320. I got a chance to work with this mag and I have to say… it’s been fun! #p320 #sigsauer #magazine @TheRogueBanshee *** You can support our work by *** ♦ Shop our Amazon Store: https://www.amazon.com/shop/theroguebanshee ♦ Check out our MERCH Store: […]

Jason Schaller

July 8, 2022

0

0

What drives gun shop employees nuts? Joe Morse and I tell you in episode 60 of For The Love Of Guns

Ever wonder what it is like behind the curtain at a gun shop? Joe from Shooting Gallery New England joins me in today’s podcast to discuss some of the things we see daily.  Don’t forget to sign up for my newsletter to see more content and what I am up to. you can sign up […]

Jason Schaller

October 3, 2022

0

0

Watch the 360 VR BRG USA Gen 2 Shooting Experience at the SHOT Show 2023

In this 360 VR BRG USA Gen 2 Shooting Experience, you’ll get a first-hand look at the new pistol from BRG-USA. You will be able to see the entire range while I get my first shots in on this excellent pistol! This VR shooting experience is a great way to learn more about the new […]

The Rogue Banshee

January 17, 2023

0

0

The Best Scope Mounting Technique For Maximum Accuracy

Scope mounting isn’t hard but there are a few gotchas that Real Avid gets you around quickly with the Scope Mounting and bore sighting kit. This kit includes the Level Right pro, Smart-Torque and Viz-max to give you all the tools you need to do a professional scope mounting job right at home. To see […]

Jason Schaller

June 2, 2023

0

0

🔒 Secure, Comfortable, and Ready: Your EDC Holster Selection Blueprint! 🛡️

🎧 Tune in to our latest podcast episode as we dive deep into the world of EDC (Everyday Carry) holsters with our special guest, Susan Romanov from the Shooting for Women Alliance. This is a must-listen for all firearm enthusiasts, whether you’re new to concealed carry or a seasoned pro. 👉 In this episode, we […]

Jason Schaller

October 29, 2023

0

0