- TL;DR – Why the HangAR System Wins
- Why traditional storage fails
- How does the HangAR System work?
- ✅ On the upper:
- ✅ On the wall:
- Compatibility with the HangAR System
- Optional Accessories
- Pros and Cons of the HangAR System
- Who is The HangAR System for?
- What uppers will the HangAR System hold?
- Optional Mounting Upgrades
- Why Takedown Pins Matter for AR Upper Storage
- Real Use Case: Built for People Who Actually Use Their Rifles
- How It Compares to Other Mounting Options
- Built by AR Shooters, Not Storage Companies
- A Smart Mount Grows With You
- Internal Links
- FAQ
- Final Thoughts
- Content Use & Compliance
- Affiliate Disclaimer
- Firearm Safety Notice
This page may contain affiliate links. If you click and buy, I may earn a small commission at no extra cost to you. Your purchase using affiliate links helps support the creation of independent content.
You’ve got uppers. They deserve a better home.
The HangAR System solves one of the most annoying storage problems in any gun room—how to cleanly, securely, and safely store your AR uppers. We ran it with AR-15s and AR-10s and it looks great. Whether it’s for your gun room, bench, or safe, this mount locks in tight, shows off your build, and keeps your gear within arm’s reach. Clean. Secure. No excuses.
TL;DR – Why the HangAR System Wins
- Mounts through takedown pin holes – no tools, no modification
- Fits AR-15 and AR-10 uppers – just choose the right model
- Low-profile aluminum bracket – clean display, no clutter
- Mounts to walls or safes – includes screws or adhesive pads
- Optional mag and slat wall mounts – expand your setup easily
- Rated for real-world use – holds securely without wobble
Why traditional storage fails
Gun owners know the pain. Uppers piled in bins. Leaned in corners. Shoved in foam cases or wedged onto random hooks. It’s ugly, inefficient, and risky.
We’ve even stored them by sticking a peg through the takedown pin hole. It looked awful—and felt worse.
HangAR fixes that. It’s built specifically for AR-pattern uppers. It doesn’t rely on cradling the barrel, jamming the charging handle, or flexing your furniture.
How does the HangAR System work?
The genius is in the interface. HangAR mounts through the takedown pin holes using a precision-machined bracket. That bracket then locks into a wall plate using a slot-and-rail interface.
✅ On the upper:
- Pick the correct version (AR-15 or AR-10)
- Slide the bracket into the takedown holes
- It self-centers and grips without tools
✅ On the wall:
- Mark and drill your wall, safe, or cabinet
- Use included screws or adhesive strips
- Slide the upper and bracket down into the plate
Compatibility with the HangAR System
The HangAR System is designed for:
- AR-15 Uppers: Standard MIL-SPEC receivers.
- AR-10 Uppers: DPMS-style receivers.
Ensure you select the correct model for your specific upper receiver type.
Optional Accessories
Enhance your HangAR setup with these add-ons:
- Magnetic Mounts: Ideal for attaching to metal surfaces like safes.
- Slat Wall Kits: Perfect for retail displays or organized gun rooms.
- Stealth Mounts: For a more discreet storage solution for a full rifle.
These accessories offer flexibility, allowing you to customize your storage to fit your space and needs.
Pros and Cons of the HangAR System
Pros:
- Secure Fit: Mounts directly through takedown pin holes, ensuring stability.
- Space-Saving Design: Vertical storage frees up valuable space in safes and rooms.
- Versatile Mounting Options: Compatible with various surfaces and configurations.
- Durable Construction: Made from high-quality aluminum for longevity.
- Aesthetic Appeal: Provides a clean, professional display for your uppers.Amazon
Cons:
- Upper Receiver Only: Designed specifically for AR-15 and AR-10 uppers; not suitable for complete rifles.
Who is The HangAR System for?
- DIY gun room builders
- Armorer’s benches
- Shops or builders displaying inventory
- Anyone who hates cluttered floors and foam trays
This isn’t a gimmick mount. It’s purpose-built for one job: hanging AR uppers cleanly and securely.
What uppers will the HangAR System hold?
If it has a MIL-SPEC AR-15 or AR-10 upper, you’re set. That includes:
- Forged and billet uppers
- Factory and DIY builds
- Full-length or pistol builds (as long as takedown holes are present)
The HangAR bracket does not require a specific barrel length, extension, or M-LOK slots. Just a standard upper receiver. Choose the right bracket (AR-15 vs. AR-10) and you’re good to go.
Optional Mounting Upgrades
HangAR doesn’t stop at just wall brackets. It’s a modular system:
- Slat wall adapter – for shop or home display walls
- Magnetic backing plate – stick it directly to a steel safe interior
- Pegboard compatible – fits cleanly with your garage setup
This makes it one of the most flexible AR upper storage systems out there.
Why Takedown Pins Matter for AR Upper Storage
One of the smartest features of the HangAR System is how it locks into the takedown pin holes of your AR upper. This isn’t just a secure way to hang your gear—it’s precise, stable, and stress-free.
If your upper uses a standard AR-15 or AR-10 takedown pin setup, you’re good to go. That includes forged, billet, factory, or DIY. Just choose the correct model (AR-15 or AR-10), and it will mount cleanly through the rear takedown pin slot—giving you a solid anchor point that won’t scuff your gear or stress your finish.
This kind of fitment isn’t possible with pegboard hooks or generic mounts. The HangAR System makes it modular without compromise.
Real Use Case: Built for People Who Actually Use Their Rifles
I used to store my uppers on a pegboard using a steel hook that slid through the takedown pin hole. It worked, sort of—but it looked cheap and made my gear look slapped together. That peg would wiggle loose. It scratched anodizing. And worse, it made my wall look like a garage, not a proper bench.
With HangAR, I can store my builds like they deserve. The interface is clean. The look is tactical, not tacky. And whether I’m doing content or cleaning, I know each upper has a home.
“This is the cleanest way to mount your AR upper. It looks like it’s floating—and it’s secure enough that I don’t think twice about leaving it loaded up.”
Jason Schaller
How It Compares to Other Mounting Options
There are plenty of ways to hang an upper—but most fall short. Here’s how the HangAR System stacks up:
| Method | Pros | Cons |
|---|---|---|
| HangAR System | Secure, clean, mounts through pins | Requires correct model (AR15 vs AR10) |
| Pegboard Hooks | Cheap, widely available | Wobbly, scratches finish, not precise |
| Cradle Mounts | Holds whole rifle | Bulky, not ideal for uppers only |
| Foam Racks | Protective padding | Eats space, looks cluttered, not secure |
| DIY Brackets | Custom fit possible | Time-consuming, usually one-off solutions |
HangAR isn’t a generic fix—it’s purpose-built for uppers, and it shows.
Built by AR Shooters, Not Storage Companies
This isn’t a repurposed guitar hook or a rebranded utility bracket. The HangAR was designed by AR owners who understand what actually matters:
- No extra stress on barrel or handguard
- Works with optics, lights, and accessories still installed
- Locks in tight but slides out fast
- Doesn’t mess with zero or shift weight
- Installs fast with minimal tools
That’s the kind of design thinking that only comes from people who’ve lived the problem—and needed a better answer.
A Smart Mount Grows With You
One of the best things about the HangAR is how modular it is. Starting with one upper? Great. Add more brackets later, use the same plates. Changing builds or calibers? Just slide the upper off and drop in the next one.
It’s like a plug-and-play system for your gun wall.
Want to expand? Add:
- A slat wall plate to turn your safe into a gallery
- Extra brackets so every upper has its own mount
- Magnetic backing for safe doors or tool chests
It grows with your collection—without forcing you to rebuild your storage every time.
Internal Links
FAQ
Q: Will it work with AR pistols?
Yes. As long as it’s a standard upper with takedown pin holes.
Q: What if I change calibers often?
Buy a bracket per upper. They’re cheap and swap fast.
Q: Can I mount to a safe?
Yes. Use the magnetic mount option
Q: Do I need tools to remove it?
Nope, unscrew the mount from the front and rear takedown pin holes.
Q: What’s better—this or a rack?
This. You save space, get faster access, and it looks professional.
Final Thoughts
If you’re serious about AR builds, stop stacking your uppers in boxes or balancing them on shelves. The HangAR System gives your gear the respect it deserves—and keeps your space clean, organized, and mission-ready.
Mount your upper the right way.
Grab it at trb.fyi/har (code: TRB2025 for 10% off)
Join The Rogue Nation!
Stay in the Loop with Real-World Gun Maintenance
No spam. Just proven firearm maintenance tips, gear reviews, and DIY builds, straight from a former gunsmith and 2A educator.
You’ll get:
DIY gunsmithing insights backed by experience
Behind-the-scenes builds from The Rogue Banshee
First access to new disassembly & troubleshooting guides
Tools and fixes that actually work
Support & Resources:
Love what I do here? Here’s how to support the mission and gear up::
• Shop Tools & Parts: trb.fyi/az
• TRB Merch: trb.fyi/merch
• YouTube Members Perks: trb.fyi/ytmembers
• All Resources in One Place: link.trb.fyi
Credits and Socials:
Connect with Me:
Follow for tools, tips, and teardown walk-throughs:
• Instagram – Behind-the-scenes shop content
• Facebook – Community posts & guide drops
• Twitter – Quick rants, 2A news, and hot takes
• Website – Full archive of all TRB content
Credits:
Original Content by The Rogue Banshee / My Rogue Solutions LLC.
Credit: Jason Schaller
Email: jschaller@trb.fyi
About the Author: Jason Schaller is a former FFL holder and founder of Eagle Eye Shooters Supply in Helena, MT, where he provided professional gunsmithing services and guided customers on all aspects of firearms ownership. Today, he teaches DIY gunsmithing at The Rogue Banshee and serves as a Chief Instructor at Freedom Crew University. With over a decade of hands-on professional experience with firearms and nearly 30 years in IT, Jason also holds top cybersecurity certifications including CISSP, CISA, and CRISC. When he’s not geeking out, he’s helping others build self-reliance, critical thinking, and firearms proficiency through real-world content.
Disclaimers:
Content Use & Compliance
The videos, articles, and images shared by The Rogue Banshee feature gear, tools, and products for informational and entertainment purposes only. All activities follow local, state, and federal laws where they were conducted in. All activities are conducted safely under professional supervision in approved locations.
Affiliate Disclaimer
Some links are affiliate-based. No extra cost to you, but they help support the work we do her when you purchase though them. Best of all, you support the content you want to see, hear and read with nothing out of your pocket.
Firearm Safety Notice
I promote safe and responsible firearm ownership. All activities are conducted in a controlled, professional environment.