Sig P320 FCU Disassembly and Reassembly

Sig P320 FCU Disassembly and Reassembly

 

Sig P320 FCU Disassembly and Reassembly 

Our P320 FCU Disassembly and Reassembly Video will walk you through disassembling the Fire Control Unit down to its individual components and then put it back together again.  

This video features P320 configured to be a compact 40 S&W. However, this process will also work for the calibers and configurations of the P320.

Sig P320 – Learn More 

If you interested in learning more about the P320 pistol, visit our Slide Disassembly, Slide Reassembly, FCU Disassembly/reassembly, as well as our Fire Control Unit Removal and Grip Module videos.

While you are at our site, why not learn more about the tools that we used on the Sig P320 videos visit https://trb.fyi/tools-used-in-the-p320-disassembly-and-reassembly-videos and visit our troubleshooting guides at https://trb.fyi/troubleshooting/ while you are at our page.

Learn about building an 80% P320

We have the most complete coverage of the P320 80% build process on the Internet. Make sure you visit our P320 80% Frame Completion and P320 80% Range Testing videos. Also, visit our Sig P320 80% Frame Rail Calculator to help you trim the frame rails and our P320 80% Build Adventure article to read about the problems that we ran into during this build. 

Our videos and articles will help you complete this build and show you some of the areas that can be problematic. The P320 80% build is not hard to complete and we consider it an intermediate skill project. 

Sig P320 FCU Disassembly and Reassembly Video Index:  

Removing the Trigger and Trigger Bar – 0:35 

Removing the Slide Catch Lever – 2:05 

Disconnecting the Takedown Safety Lever – 2:54 

Removing the Sear and Safety Lifter – 3:46 

Removing the Safety Lever Housing – 5:36 

Assembling the Safety Lever Housing – 6:47 

Installing the Safety Lever Housing – 7:27 

Installing the Safety Lifter and Sear – 8:48 

Installing the Takedown Safety Lever – 12:16 

Installing the Slide Catch Lever – 12:54 

Installing the Trigger Bar and Trigger – 13:44 

How to Support Us to Keep Free Content Coming

 

If you like the work that we do here at The Rogue Banshee, please consider supporting us for free by clicking on our affiliate links before purchasing gear, parts and tools or donating to us on Patreon. Your support allows us to continue to produce the quality content that you expect from us. 

 

Don’t forget to spread the word on your favorite Social Media platform by clicking the sharing buttons below.

Scroll to Top