PF940SC Dremel lost image

Polymer80 PF940SC completion using a Dremel

Polymer80 PF940SC completion using a Dremel

 

Our Polymer80 PF940SC completion using a Dremel video will show you how to complete the Polymer80 subcompact frame using a Dremel. Using a Dremel is the easiest way to complete a Polymer 80 frame. We find using the endmill that comes with the kit hard to use and un-necessary. We also completed this frame using a drill press. Click here to see that video.

New to 80 Percent?

Are you new to 80 Percent gun building? Don’t worry, this is one of the easiest builds that you can do. It does not require special tools and the build goes together easy. You will not spend hours doing a slide fitting as you will do on a 1911 build. This video will walk you through the machining process and then how to assemble the parts into the lower. We also have a Glock slide video if for some reason your slide came disassembled. 

Polymer80 PF940SC

 

If you want to learn more about the tools used in the PF940SC Videos visit https://trb.fyi/tools-used-in-the-polymer80-pf940sc-completion-videos/. If you need more information about troubleshooting visit our Glock Troubleshooting Guide at https://trb.fyi/glock-troubleshooting-guide/

 

Video index:

 

What’s included – 0:16

Basic steps – 0:44

Drilling the frame – 1:12

Cutting the frame – 2:30

Cutting the barrel block – 4:05

Installing the magazine release – 5:33

Installing the rails – 6:29

Installing the trigger – 7:57

Installing the takedown – 10:16

Does it work? – 11:21

Support us

If you like the work that we do here at The Rogue Banshee, please consider supporting us for free by clicking on our affiliate links before purchasing gear, parts and tools or donating to us on Patreon. Your support allows us to continue to produce the quality content that you expect from us. 

 

Don’t forget to spread the word on your favorite Social Media platform by clicking the sharing buttons below.