5D Tactical Tools Thumbnail
Spread the love

5D Tactical – Tools used in our video


There are several tools we used in the 5D Tactical video. Below is the list of tools and the links to purchase them. Make sure you visit our video 5D Tactical – Using the Router Jig Pro to see these tools in use. 

When purchasing tools, I try to buy them from Brownells since they have a 100% Satisfaction Guarantee. I have broken roll pin punches that Brownells has replaced with no questions asked. 

I purchased my Jig from JSD Supply. They have the lowest advertised price for the jig that I have found. 

5D Tactical Jig Pro

#2 Roll Pin Holder Punch – Used to tighten the buffer adapter

#2 Philips – Used to install jig screws

Scotch-Brite Sponge – Used to debur the router threads

5″ OAL Needle Nose Pliers – Used to remove the collet on the router

5/8″ Wrench – Used to install mill on the router

7/64″ Allen wrench– Used to change guide pins

Simple Green – Used to clean up the jig and lower

Masking Tape – Used to protect the lower in the jig

Ryobi Drill – Used to drill the pilot, selector, hammer and trigger pin holes

Rigid 24012 Router – To mill out the lower

Oatey 3024 Dark Cutting Oil – To cool and lubricate the mill and drill bits

5 in. Rugged Cast Iron Drill Press Milling Vise – To hold the Frame


If you like the work that we do at The Rogue Banshee, please consider supporting us for free by clicking on our affiliate links before purchasing gear, parts and tools, donating to us using the links to the right of this article or becoming a patron on Patreon. Your support helps us produce content as we do not allow vendors or manufacturers to pay us for content. 

Also, don’t forget to share our content on your favorite social media platform by clicking the sharing buttons below.